Thermoformed PET Interior Felt

Thermoformed PET Interior Felt

Thermoformed PET Interior Felt combines rigid PET support layers with flexible PET acoustic layers in configurations for automotive headliners, door panels, main carpets, trunk interiors, and tailgate interior systems. Material weight, layer structure, and surface materials vary by application. The layered construction combines component support with acoustic and interior insulation functions.

Thermoformed PET Interior Felt for Automotive Interior Systems

Thermoformed PET Interior Felt combines rigid PET support layers with flexible PET acoustic layers in configurations for automotive headliners, door panels, main carpets, trunk interiors, and tailgate interior systems. Material weight, layer structure, and surface materials vary by application. The layered construction combines component support with acoustic and interior insulation functions.

Product Structure & Automotive Applications

The material is available in rigid, flexible, and soft-and-rigid composite configurations.

For tailgate interior panels, the documented reference structure consists of:

  • Rigid PET felt: 600–1,000 g/m²
  • Soft PET acoustic layer: approximately 300 g/m²

The rigid layer provides structural support and formed shape stability. The flexible layer provides sound absorption, cushioning, and thermal insulation.

Other applications include automotive headliners, door panels, main carpets, trunk side panels, spare-wheel covers, and parcel shelves. Each application uses its own material configuration and reference specifications.

Material Configurations & Technical Specifications

The following table lists the application-specific configurations documented for Thermoformed PET Interior Felt.

Application Material configuration Reference specification
Door-panel frame Rigid PET felt 600–1,000 g/m²
Door acoustic liner Soft PET felt 300–600 g/m²; NRC ≥0.65
Door sheet-metal side PET hot-rolled fabric with PE film PET fabric: 80–150 g/m²; optional water-protection or reinforcement configuration
Headliner Rigid PET supporting layer 600–1,000 g/m²
Headliner Soft PET acoustic layer 400–800 g/m²
Main carpet support Rigid PET felt 600–1,200 g/m²; 2–3 mm thickness
Main carpet acoustic layer Soft PET felt 400–800 g/m²; 10–20 mm thickness
Main carpet surface PET needle-punched carpet or PA tufted material 300–600 g/m²
Trunk side panels Rigid felt laminated with fabric 800–1,200 g/m²
Spare-wheel covers Multilayer rigid-felt structure 1,000–1,800 g/m²
Parcel shelves Rigid felt 1,000–1,500 g/m²
Tailgate interior panels Rigid PET felt 600–1,000 g/m²
Tailgate interior panels Soft PET acoustic layer Approximately 300 g/m²

These specifications apply to their listed component configurations. The NRC value applies to the door acoustic liner, while the 2–3 mm and 10–20 mm thickness ranges apply to the main carpet structure. The PET fabric and PE film combination is an optional door-panel configuration.

Thermoforming Process & Surface Material Options

Hot pressing integrates selected surface materials with the PET felt structure. Available surface options include:

  • Nonwoven fabric
  • Knitted material
  • Needle-punched carpet

The component can be configured with a rigid PET substrate, a flexible acoustic liner, or a soft-and-rigid molded assembly. A sunroof reinforcement frame can also be integrated during forming where required by the component design.

Customization & Product Development

Available customization areas include:

  • PET felt basis weight
  • Material thickness
  • Acoustic performance
  • Rigid and flexible layer configurations
  • Surface material selection

Project development support includes material selection, mold development, sample preparation, sample validation, and trial production. Processing capabilities include die-cutting, surface covering, and integrated steam molding.

Quality Control & Product Testing

The product information lists the following material and environmental performance data:

Test item Listed value or requirement
Glass fiber No glass fiber
Formaldehyde emission ≤15 μg/(m²·h)
Total TVOC carbon ≤50 μgC/g
Odor grade ≤3.5
Fogging condensate ≤2 mg
Mold resistance Grade 0
Temperature cycling 50 cycles from -40°C to +120°C, with no cracking or delamination
Humidity aging 50°C, 95% RH, 1,000 hours
Strength retention More than 85%

The product information also lists RoHS, REACH, ELV, and GB 30512 compliance requirements. Haokai conducts 100% product inspection before packaging and accepts third-party inspection.

Manufacturing Capabilities & Production Supply

As an automotive interior felt manufacturer, Haokai operates two production facilities with a combined area of 30,000 m² and a workforce of more than 100 employees.

Manufacturing resources include:

  • PET continuous-fiber material production lines
  • Automotive felt molding equipment
  • Precision die-cutting facilities
  • Steam-molded component production
  • Professional testing laboratories

Project support covers material development, mold development, sample validation, trial production, and mass-production management. Production arrangements are evaluated according to confirmed component specifications and project requirements.

Request a Thermoformed PET Interior Felt Quotation

Send your component drawing, technical specifications, sample photos, or estimated order quantity for a custom thermoformed PET interior felt project evaluation. We can review the required material configuration, surface options, and processing requirements and provide a quotation based on your project information.

Hot Tags: thermoformed pet interior felt, China thermoformed pet interior felt manufacturers, suppliers, factory, Rear Hatch Storage Pocket Carrier

Send Inquiry