Door Acoustic Insulation Materials

Our automotive door acoustic insulation materials include flexible bicomponent acoustic felt, PP/PET soundproofing blankets, PET acoustic wadding, and thermoformed acoustic felt. Available constructions cover door-panel acoustic layers, flexible cavity filling, and shaped inner-door liners.

As an automotive acoustic felt manufacturer, we combine a PP microfiber absorption network with a PET fiber supporting structure. Door-panel and pillar grades are available at 150–300 g/m² and 5–10 mm thickness, with additional specifications for other automotive applications.

 
 

Door Acoustic Insulation Material Options

Material Construction Door Application Available Supply Form
Automotive Acoustic Felt PP microfiber and PET supporting fibers Door panels and door trims Custom-shaped components
Car Soundproofing Blanket PP/PET bicomponent fibers Door interiors and larger insulation areas Rolls and pre-cut sheets
Car Sound Absorbing Wadding Thermally bonded PET and LMPET fibers Door cavity filling Rolls and pre-cut sheets
Thermoformed Acoustic Felt Molded PET acoustic felt Shaped inner-door acoustic liners Three-dimensional formed components
PET Formed Interior Felt Rigid PET felt and flexible acoustic PET felt Door-panel structural and acoustic layers Formed composite components

Material Specifications & Performance

Automotive Acoustic Felt

Specification Available Value
Automotive Application Basis Weight 150–850 g/m²
Thickness 5–35 mm
Door Panel and Pillar Grade Basis Weight 150–300 g/m²
Door Panel and Pillar Grade Thickness 5–10 mm
Compression Recovery ≥70%
Water Absorption ≤1%
Long-Term Operating Temperature -40°C to +110°C
Burning Rate ≤70 mm/min (GB 8410 / FMVSS 302)
Fogging Condensate ≤2 mg
Formaldehyde ≤10 μg/m³

Car Soundproofing Blanket

Specification Available Value
PP Fiber Content 60–65%
PET Fiber Content 35–40%
Thickness 5–40 mm
Maximum Width 165 cm
Compression Recovery ≥70%
Long-Term Operating Temperature -40°C to +110°C
Formaldehyde ≤10 μg/m³ (E1 level stated on product page)
Fogging Condensate ≤2 mg
PET Fiber Melting Point ≥250°C

Available in rolls or pre-cut sheets.

Thermoformed Acoustic Felt

Specification Available Value
Fine PET Fiber Content (Premium Grade) 65–75%
Fiber Diameter Approximately 1–5 μm
Basis Weight (Premium Grade) 600–1,200 g/m²
Thickness 15–30 mm
Porosity 90–96%
Air Permeability 500–1,000 L/(m²·s)
NRC (Standard Grade, 20 mm) 0.55–0.65
NRC (Premium Grade, 20 mm) 0.70–0.85
Compression Recovery ≥85%

PET Formed Interior Felt

Specification Available Value
Rigid PET Felt Layer Basis Weight 600–1,000 g/m²
Flexible Acoustic PET Felt Layer Basis Weight 300–600 g/m²
Flexible Layer NRC ≥0.65
Formaldehyde Emission ≤15 μg/(m²·h)
TVOC ≤50 μgC/g
Odor Rating ≤3.5
Fogging Condensate ≤2 mg
Mold Resistance Rating 0
Glass Fiber Not used

The rigid and flexible PET layers have separate specifications and should not be treated as one combined basis-weight range.

Material Customization & Processing

We develop automotive acoustic materials and formed components according to customer drawings, prototypes, and component requirements.

Material Customization

  • Basis weight and thickness.
  • Material dimensions and cutting profiles.
  • Fiber composition and material construction.
  • Acoustic performance requirements.
  • Formed component geometry.

Surface and Layer Configurations

  • Single-sided white or black nonwoven lamination for Automotive Acoustic Felt.
  • Aluminum foil options for engine-side or wheel-arch-side applications.
  • Rigid and flexible PET felt combinations.
  • Surface lamination with nonwoven fabric, knitted fabric, needle-punched carpet, or PA tufted carpet for PET Formed Interior Felt.

Available Processing Methods

Processing Method Application
Die Cutting Custom outlines and component dimensions
Hot Pressing Formed acoustic components
Laser Cutting Precision-shaped material parts
Edge Sealing Finished material edges
Steam Molding Three-dimensional PET acoustic components
Ultrasonic Welding Joining acoustic felt to PP plastic components
Lamination Combining acoustic and surface layers

Thermoformed Acoustic Felt can incorporate holes, curved profiles, clearance areas, and locally compressed sections.

PET Formed Interior Felt can integrate rigid and flexible layers during thermoforming. Sunroof reinforcement frames and PE films on sheet-metal sides can also be incorporated into the component design.

Automotive Manufacturing & Quality Capabilities

Our automotive acoustic materials factory operations cover bicomponent acoustic materials, PET continuous filament materials, polyurethane foam components, thermoforming, and precision die cutting.

Manufacturing Facilities

Manufacturing Resource Company-Wide Capability
Production Bases 2
Total Factory Area 30,000 m²
Employees 100+
Bicomponent Production Lines 2
PET Production Lines 2
PU Production Lines 2
Pressing Machines 20
Steam Molding Production line added in 2025

These resources support material production, component forming, and downstream processing.

Quality Management & Testing

Our quality management system is certified to IATF 16949:2016. Company-wide automotive material testing and validation activities cover:

  • Flammability testing.
  • Odor evaluation.
  • VOC testing.
  • Fogging testing.
  • Mold resistance.
  • High- and low-temperature aging.

We also provide prototype development, third-party testing coordination, and technical support for acoustic and environmental performance evaluation.

Automotive Project Experience

Our automotive supply experience includes cooperation with vehicle manufacturers and automotive supply chains across multiple production programs. The company reports supplying more than 15 automotive OEMs and supporting materials used across more than 100 production vehicle models.

Project support covers tooling, prototype development, trial production, mass production, and ongoing quality coordination.

Request a Quote for Automotive Door Acoustic Insulation Materials

Send us your material specifications, component drawings, sample photos, or estimated order quantity. Our team can review the material structure, thickness, basis weight, processing requirements, and available configurations.

For formed door acoustic components, drawings or physical samples can be used as the starting point for tooling and prototype evaluation.

For material supply inquiries, include the required material type, dimensions, target specifications, and preferred supply form, such as rolls, sheets, or formed components.

Submit your product requirements to request a quotation and discuss material selection, customization, and sample development.

As one of the most professional automotive door acoustic insulation materials manufacturers and suppliers in China, we also support customized service. We warmly welcome you to wholesale bulk automotive door acoustic insulation materials from our factory. If you have any enquiry about quotation, please feel free to email us.