Molded Front Bulkhead Insulator

Molded Front Bulkhead Insulator

Our Molded Front Bulkhead Insulator is manufactured in Rugao, Jiangsu, China. We combine a rigid PET structural layer and a soft PET acoustic layer in a three-dimensional molded construction. Available with a molded thickness of 2–8 mm, rigid-layer weights of 800–1,500 g/m², and soft-layer weights of 300–800 g/m², it is designed for automotive front bulkhead and firewall insulation applications that require a defined molded structure and a combination of acoustic functions.

Our Molded Front Bulkhead Insulator is manufactured in Rugao, Jiangsu, China. We combine a rigid PET structural layer and a soft PET acoustic layer in a three-dimensional molded construction. Available with a molded thickness of 2–8 mm, rigid-layer weights of 800–1,500 g/m², and soft-layer weights of 300–800 g/m², it is designed for automotive front bulkhead and firewall insulation applications that require a defined molded structure and a combination of acoustic functions.

Product Applications and Acoustic Functions

The Molded Front Bulkhead Insulator is designed for automotive front bulkhead structures, including internal and external firewall insulation applications.

Its two-layer PET construction combines different functions:

  • Rigid structural layer: Provides structural support and molded shape retention while helping block airborne noise.
  • Soft acoustic layer: Provides a porous structure for absorbing mid- and high-frequency noise.
  • Combined construction: Combines sound absorption with noise insulation and supports control of structure-borne noise.

Typical application areas include internal firewall insulators, external firewall insulators, engine-compartment thermal pads, electric-motor sound covers, and NEV front-bulkhead NVH components.

Material and Specification Selection

We offer different PET layer configurations to meet structural and acoustic requirements.

Specification Available Range / Configuration
Rigid structural layer weight 800–1,500 g/m²
Soft acoustic layer weight 300–800 g/m²
Optional rigid reinforcement 1,200–2,000 g/m²
Molded thickness 2–8 mm
LMPET content in rigid layer 30%–50%
LMPET content in soft layer 15%–25%
Molding pressure 5–8 MPa
Combined NRC 0.60–0.90

The rigid and soft layers use different LMPET content configurations. Their layer weights can be adjusted independently, and an additional rigid reinforcement layer is available as an option.

Acoustic Performance

The molded PET construction combines sound absorption and noise insulation within one automotive component.

The published combined Noise Reduction Coefficient (NRC) range is 0.60–0.90.

The two layers serve different acoustic functions:

  • The rigid layer helps block airborne noise and supports control of structure-borne noise.
  • The soft layer absorbs mid- and high-frequency noise.

Actual acoustic performance depends on the material configuration and test conditions. The published product information does not specify frequency-band results, sound transmission loss, or the test method and conditions behind the NRC range. These values should therefore be confirmed against the requirements and test criteria of the target project.

Customization and Molded Design

As a China-based PET molded automotive insulation component manufacturer and supplier, we support OEM and ODM development of custom Molded Front Bulkhead Insulators based on customer sheet-metal data, technical drawings, or prototype samples.

Available customization options include:

Customization Item Available Options
Rigid layer weight Adjustable
Soft layer weight Adjustable
Structural reinforcement Optional rigid reinforcement layer, 1,200–2,000 g/m²
Local compression Custom compression areas
Molded geometry Deep cavities, raised surfaces, and recessed surfaces
Wiring clearance Custom clearance areas
Steering column clearance Custom clearance areas
Air-conditioning pipe clearance Custom clearance areas
Mounting features Integrated clips
Reinforcement features Integrated metal inserts

Our forming process uses preheating followed by cold-mold forming to produce three-dimensional structures. The mold can be designed to accommodate deep cavities, raised and recessed areas, localized compression, and required installation clearances.

Manufacturing and Supply

We provide PET material processing and molded component manufacturing for automotive acoustic component projects, supported by internal quality inspection and project coordination.

For the Molded Front Bulkhead Insulator:

Supply Item Available Information
Sample development Typically 10–15 days
Finished-product inspection 100% inspection before packaging
Third-party inspection Accepted
Manufacturing location Rugao, Jiangsu, China
Delivery term EXW
Payment condition Advance payment

Our broader manufacturing operations also cover automotive acoustic materials, PET molded structural components, and PU foam parts. These are company-level capabilities rather than product-specific certifications or performance guarantees.

OEM Project Inquiry

For a Molded Front Bulkhead Insulator project, you can start with your existing technical drawings, front bulkhead sheet-metal data, or prototype samples.

Send us the project information you already have, such as:

  • 2D technical drawings or 3D CAD files.
  • Existing component photos or prototype samples.
  • Required rigid and soft layer specifications, if available.
  • Target molded thickness and structural requirements.
  • Estimated order quantity.

We will review the available information and evaluate the material configuration, molded structure, customization requirements, and sample development arrangements.

Send us your drawings, sample photos, or current purchasing specifications to discuss your Molded Front Bulkhead Insulator requirements and request a project quotation.

Hot Tags: molded front bulkhead insulator, China molded front bulkhead insulator manufacturers, suppliers, factory, Rigid Trunk Side Support Board

Send Inquiry