Sunroof Shade Acoustic Lining
video
Sunroof Shade Acoustic Lining

Sunroof Shade Acoustic Lining

Inside a retracting sunroof cassette, thin layers of felt are seldom noticed, yet they decide whether wind rush and glass-panel resonance reach passengers above the head. The sunroof shade acoustic lining is a lightweight thermoformed PET absorber that sits between the rolling shade fabric and the roof opening, tuned to fit the narrow stack depth of the cassette rather than to stand as a stiff board.

Product Description

 

Inside a retracting sunroof cassette, thin layers of felt are seldom noticed, yet they decide whether wind rush and glass-panel resonance reach passengers above the head. The sunroof shade acoustic lining is a lightweight thermoformed PET absorber that sits between the rolling shade fabric and the roof opening, tuned to fit the narrow stack depth of the cassette rather than to stand as a stiff board. Because the shade opens, closes, and retracts thousands of times, the lining must remain lofty and compressible after each cycle instead of flattening into a dense, non-absorbent layer. Its open fiber network dissipates high-frequency wind noise that slips around the sealed panoramic roof and the structural rattle carried through the glass panel, while the thin profile leaves clearance for the rolling fabric, end stops, and housing curve. For buyers, the benefit is a quieter headliner zone and a shade that still glides smoothly, without adding visible bulk or changing the cassette's appearance.

 

Inside a roller-shade cassette the available stack depth is measured in millimeters and the part must clear the rolling fabric, end stops, and housing curve at every shade position. Haokai develops the lining from the customer's cassette drawings or a physical prototype, tuning microfine content, raw-felt weight, hot-press density, and finished thickness against the exact air cavity and curve rather than supplying a generic flat pad; fit samples are prepared so buyers can check nesting, rolling clearance, and acoustic recovery before committing to volume production. Each formed part receives 100% inspection before packing, which matters for a moving component where a gap or an over-thick zone can bind the shade.

 

Specifications

 

Parameter

Specification

Material

PET + LMPET blend (conventional PET : LMPET = 75-85:15-25), thermally bonded, no solvent adhesive

Microfine PET content (high-end)

up to 65%-75%; fiber diameter about 1-5 µm

Raw-felt basis weight

200-1,200 g/m²; high-end acoustic grade 600-1,200 g/m²

Finished thickness

5-40 mm; high-end acoustic grade 15-30 mm

Porosity

70%-95%; high-end grade 90%-96%

Air permeability

500-1,000 L/(m²·s)

NRC (20 mm)

0.55-0.65 standard; 0.70-0.85 high-end

Compression recovery

≥70%; automotive grades ≥80%; high-end ≥85%

Emissions (high-end)

formaldehyde ≤10 µg/(m²·h); odor ≤3.0

Color

To Be Confirmed

 

 

Applications

 

product-800-800

Roller-shade cassette lining: follows the curved cassette housing while leaving room for the rolling fabric; open pores absorb wind rush around the glass without adding stack thickness that could bind the shade.

Panoramic-roof header and side-gap fill: lofty soft fill damps mid-frequency cavity noise around the glass frame and rebounds after each shade cycle, so the layer never flattens into a non-absorber.

Overhead roof-edge absorber near passengers: microfine high-end grade targets high-frequency wind noise while meeting formaldehyde ≤10 µg/(m²·h) and odor ≤3.0 interior-air limits.

Customization

 

  • Microfine-fiber content, raw-felt weight, hot-press density, and finished thickness tuned to cassette depth and target frequency
  • 3D thermoforming / steam molding to cassette and housing curves; precision die-cut holes, end clearances, and local compression zones
  • Target-frequency tuning against the available air cavity; OEM/ODM developed from technical drawings or prototypes
  • Color and surface treatment: To Be Confirmed
product-800-800

 

Packaging & Transportation

 

Trade terms are EXW (ex-works): finished goods are collected from Jiangsu Haokai's facility in Rugao, Jiangsu after packing. Payment is made in advance (prepayment), with RMB and related currencies accepted. Packaging follows customer requirements, with cartons, pallets, separators, or supports chosen to protect the formed cassette liners' curved shape and prevent compression during stacking; export packaging dimensions are confirmed per project. FOB, CIF, and DDP terms are not offered.

 

 

FAQ

 

Q1: Can you manufacture this lining based on our technical drawings or prototypes?

A: Yes. Parts can be manufactured from customer technical drawings or physical prototypes; drawing-based customization is supported.

Q2: What is the MOQ?

A: The MOQ is 1,000 pieces, and different colors or models may be mixed within one MOQ order.

Q3: How do you control product quality?

A: Production follows IATF 16949 quality control.

 

Hot Tags: sunroof shade acoustic lining, China sunroof shade acoustic lining manufacturers, suppliers, factory, automotive interior thermoformed parts, automotive seat trim parts, PET Formed Interior Felt, PET thermoformed felt fiber sheets, thermoformable PET felt, thermoformed PET felt materials

Send Inquiry