Automotive Acoustic Felt

Automotive Acoustic Felt

Bicomponent Automotive Acoustic Felt is a purpose-built nonwoven for automotive NVH across pillars, dashboards, doors, headliners, firewalls, trunks, rear panels, wheel arches, and under-floor carpets.

Product Description

 

Bicomponent Automotive Acoustic Felt is a purpose-built nonwoven for automotive NVH across pillars, dashboards, doors, headliners, firewalls, trunks, rear panels, wheel arches, and under-floor carpets. The melt-blown PP structure absorbs wind noise, road noise, high-frequency motor noise, and cavity resonance, while the PET scaffold preserves thickness and recovery - at roughly half the weight of traditional felt, which matters for fuel vehicles and especially for new-energy platforms where every kilogram counts. Grades are selected per installation area rather than one blanket weight, and the material meets automotive flammability and low-emission requirements.

 

This felt is usually delivered as a die-cut, hot-pressed, or heat-edge-sealed shaped component, not a flat roll, so precision die cutting and mold processing turn vehicle drawings into area-specific pads. It can be ultrasonically welded directly to PP dashboards and door trims, which removes tape and spray adhesive from the assembly line, and one-sided nonwoven lamination or engine-side aluminum foil can be added without changing the acoustic core. That adhesive-free joining is the main reason automotive buyers specify it over generic felt.

 

Specifications

 

Parameter

Specification

Automotive Basis Weight

150-850 g/m², selected by installation area

Common Thickness

5-35 mm

Compression Recovery

≥70%

Water Absorption

≤1%

Long-Term Service Temperature

-40°C to +110°C

Burning Rate

≤70 mm/min (GB 8410 / FMVSS 302)

Fogging Condensate

≤2 mg

Formaldehyde

≤10 μg/m³

 

 

Applications

 

product-800-800

A/B/C pillar trim, door panels, and headliners, where the 150-300 g/m², 5-10 mm grades absorb wind and road noise and rain impact at high frequency while adding minimal interior weight for fuel and NEV platforms.

Firewalls and front walls, where the 400-600 g/m² grade with optional aluminum foil addresses engine or electric-motor noise and meets GB 8410 / FMVSS 302 flammability at ≤70 mm/min.

Trunks, rear panels, wheel arches, and under-floor carpets, where 350-850 g/m², 15-35 mm grades absorb tire noise and low-frequency cavity resonance, and the felt ultrasonically welds to PP trim to reduce adhesive use.

Customization

 

Basis weight (150-850 g/m² by vehicle area), thickness (5-35 mm), dimensions, acoustic performance, and forming process are adjustable to vehicle drawings. Options include one-sided lamination with white or black nonwoven, aluminum foil on engine and wheel-arch sides, ultrasonic welding to PP components, and die-cut / hot-pressed / laser-cut / heat-edge-sealed shaped parts. OEM/ODM sample validation, small-batch trials, and volume production are supported.

 

 

Packaging & Transportation

 

Trade term is EXW with payment in advance. Packaging follows customer requirements and production progress updates with photos or videos are provided; specific component packaging dimensions are To Be Confirmed per program.

 

FAQ

 

Q: Which basis weight do you recommend for my vehicle zone?

A: We grade by area rather than one blanket weight: 150-300 g/m² for pillars, doors and headliners, 400-600 g/m² for firewalls, and 350-850 g/m² for trunks, wheel arches, and under-floor carpets, tuned to the noise source and available space.

Q: Can the felt be assembled without spray adhesive?

A: Yes. It can be ultrasonically welded to PP plastic components such as dashboards and door trims, which reduces tape and spray adhesive while allowing white or black nonwoven lamination on the visible side.

Q: Do you support OEM programs for new vehicle models?

A: Yes. We work from vehicle drawings through sample validation, small-batch trials, and volume production under automotive quality control, with 100% pre-packing inspection and dedicated coordination for model updates.

 

Hot Tags: automotive acoustic felt, China automotive acoustic felt manufacturers, suppliers, factory, bicomponent acoustic insulation panels, bicomponent door acoustic insulation, Bicomponent Polyester Acoustic Felt, bicomponent sound insulation inserts, bicomponent sound insulation pads, bicomponent vibration damping liners

Send Inquiry