Car Sound Damping Felt
video
Car Sound Damping Felt

Car Sound Damping Felt

Tire roar, panel buzz, and low-frequency road noise that radiate from floor and trunk sheet metal are what this felt targets rather than the high-frequency echo handled by thin liners. Built as a heavy bicomponent grade, it adds controlled mass and internal friction that turn vibrating panel energy into small amounts of heat instead of letting the sheet metal radiate sound into the cabin. Packed under floor carpets, in trunks, and against rear panels and wheel arches, it dampens the panels themselves rather than only absorbing sound in the air, which is why road noise feels quieter rather than merely muffled.

Product Description

 

Tire roar, panel buzz, and low-frequency road noise that radiate from floor and trunk sheet metal are what this felt targets rather than the high-frequency echo handled by thin liners. Built as a heavy bicomponent grade, it adds controlled mass and internal friction that turn vibrating panel energy into small amounts of heat instead of letting the sheet metal radiate sound into the cabin. Packed under floor carpets, in trunks, and against rear panels and wheel arches, it dampens the panels themselves rather than only absorbing sound in the air, which is why road noise feels quieter rather than merely muffled. The layer recovers after compression and stays stable through temperature and humidity changes, so the damping effect does not weaken as the material settles. Buyers choose it for cavities where tire roar and structural vibration dominate and where a soft, light fill would sag or fail to control panel movement.

 

Low-frequency behavior depends on both mass and cavity geometry, so this felt is usually specified as an irregularly shaped part rather than a flat roll. Basis-weight and thickness grading let engineers tune low-frequency performance against the actual cavity depth instead of forcing a one-size material, and batch consistency across the heavier grades keeps tire-noise and road-noise behavior predictable from trial samples through serial production. Buyers running several vehicle programs benefit because the same weight-and-thickness grading logic applies to each cavity without re-qualifying a new material family.

 

Specifications

 

Parameter

Specification

Material

PP fiber 60%-65% + hollow spiral PET fiber 35%-40%, thermal through-air bonding

Common Basis Weight

400 g/m² and above; trunk low-frequency grade 600-850 g/m²

Common Thickness

15-35 mm

Compression Recovery

≥70%

Material Density

0.01-0.06 g/cm³

Maximum Width

165 cm

Water Absorption

≤1%

Long-Term Service Temperature

-40°C to +110°C

Burning Rate

≤70 mm/min (GB 8410 / FMVSS 302)

 

 

Applications

 

product-800-800

Under-floor carpet and trunk cavities: The 600-850 g/m², 30-35 mm grade absorbs tire roar and low-frequency road noise plus trunk cavity resonance that thin, high-frequency felts cannot control effectively.

Rear panels, wheel arches, and body cavities: The pad compresses into irregular sheet-metal gaps and recovers at least 70% of its thickness, avoiding long-term acoustic loss from collapse or migration of the damping layer.

Appliance and equipment housings: The 200-400 g/m² grade can be cut, notched, or laminated to fit compressor areas of air conditioners, refrigerators, and washing machines, where it dissipates mid-to-low equipment noise inside tight metal shells.

Customization

 

Basis weight (400 g/m² and up, including the 600-850 g/m² trunk grade), thickness (15-35 mm), dimensions, and forming method are adjustable to the installation position and cavity depth. Irregular parts can be developed from technical drawings or physical prototypes with die cutting, hot pressing, and laser cutting available; maximum width is 165 cm. OEM/ODM shaped components and mixed-grade orders within one MOQ are supported.
product-800-800

 

Packaging & Transportation

 

Trade term is EXW with payment in advance. Packaging follows customer transportation and warehouse conditions, with stacks protected against compression and handling damage; finished goods are 100% inspected before packing. Detailed carton or pallet specifications for this damping felt are To Be Confirmed per order.

 

 

FAQ

 

Q1: Can I mix different colors or models in one MOQ order?

A: Yes. Different colors or models can be mixed within one MOQ order, which suits buyers stocking several heavy grades for different cavities at once.

Q2: How long does custom sample development take?

A: Custom sample development normally takes 10-15 days before mass production, so fit and low-frequency grade can be verified before volume runs.

Q3: Do you provide a warranty?

A: Products carry a stated 1-3 year warranty, with dedicated coordination for production-quality feedback.

 

Hot Tags: car sound damping felt, China car sound damping felt manufacturers, suppliers, factory, automotive multilayer acoustic materials, bicomponent acoustic damping pads, bicomponent acoustic insulation carrier, bicomponent dash acoustic insulation, bicomponent interior acoustic materials, bicomponent trunk acoustic insulation

Send Inquiry