Product Description
Bolted to the inner skin of the engine-compartment hood, this pad forms a lightweight dual-function layer between the hot engine bay and the bonnet. Its bicomponent fiber structure traps still air to slow heat transfer while a porous network absorbs engine radiation noise, so the bonnet stays cooler and engine rumble reaching the cabin drops. An aluminum-foil face on the hot side reflects radiant heat away from the paint finish, while a nonwoven or film surface can be chosen for clean handling or separation. Because the liner follows the stamped hood contour rather than sitting as a loose sheet, it fills the panel evenly without collapsing the air pockets that do the insulating work. Buyers specify it where a single part must protect paint from heat soak, damp engine noise, and meet interior flammability near a live heat source, replacing separate heat shield and sound absorber layers with one shaped component.
A hood liner must follow the stamped curvature of the bonnet without crushing the trapped-air layer that delivers both insulation and absorption, which is why this product is developed from vehicle drawings or physical prototypes rather than supplied as a flat roll. Our mold processing and precision die cutting turn a hood contour into a shaped pad with correct edge and stand-off positions, and the surface lamination is selected against the actual heat source instead of applied generically. A prototype sample lets buyers verify fit, clearance, and foil orientation before the tooling goes into volume production, reducing the trial-and-error that usually comes with shaped engine-cover parts.
Specifications
|
Parameter |
Specification |
|
Material |
Bicomponent melt-blown PP microfiber + hollow spiral PET fiber, thermal through-air bonding, no glue |
|
Thermal Conductivity |
About 0.035 W/(m·K) |
|
Long-Term Service Temperature |
-40°C to +110°C |
|
Compression Recovery |
≥70% |
|
Water Absorption |
≤1% |
|
Burning Rate |
≤70 mm/min (GB 8410 / FMVSS 302) |
|
Fogging Condensate |
≤2 mg |
|
Formaldehyde |
≤10 μg/m³ |
|
Surface Lamination |
Aluminum foil / nonwoven fabric / film |
|
Common Thickness |
5-35 mm |
Applications

Engine-compartment hood inner panel: The aluminum-foil face reflects radiant heat back toward the engine bay instead of soaking into the bonnet paint, while the porous core absorbs engine radiation noise; the ≤70 mm/min burning rate keeps the pad compliant near a live heat source.
Firewall and front-wall engine-side components: The 400-600 g/m² grade absorbs engine and motor noise beside the firewall and stays dimensionally stable from -40°C to +110°C, and the ≤1% water absorption resists condensation in the engine-side compartment.
HVAC ducts and mechanical equipment enclosures: Where noise and elevated temperature appear together, the trapped-air layer provides about 0.035 W/(m·K) insulation plus porous sound absorption, and the water-resistant, mold-stable construction suits humid plant environments.
Customization

Packaging & Transportation
Trade term is EXW with payment in advance. Packaging is arranged according to customer transportation and storage requirements to protect the laminated face and compressed stack during handling; finished goods are 100% inspected before packing and production progress photos or videos can be shared. Detailed carton or roll dimensions for this pad are To Be Confirmed per order.
FAQ
Q1: Can you manufacture the hood liner from our technical drawings or prototypes?
A: Yes. We make custom shaped parts from your technical drawings or physical prototypes, and custom components can be laser cut where holes or notches are required.
Q2: What is your MOQ?
A: The regular minimum order quantity is 1,000 pieces.
Q3: Do you accept third-party inspection?
A: Yes, customer-arranged third-party inspection is accepted, alongside 100% inspection of finished goods before packing.
Hot Tags: hood insulation pad, China hood insulation pad manufacturers, suppliers, factory, automotive acoustic parts, bicomponent acoustic barrier mats, bicomponent acoustic damping liners, bicomponent automotive acoustic materials, Bicomponent Polyester Acoustic Felt, Bicomponent Sound Absorbing Pad


