Fiber Insulation Pad
video
Fiber Insulation Pad

Fiber Insulation Pad

Bicomponent Fiber Insulation Pad is engineered for medium- and low-frequency noise, cavity resonance, and enclosed-space sound energy - not the thin high-frequency treatment handled by lighter felts.

Product Description

 

Bicomponent Fiber Insulation Pad is engineered for medium- and low-frequency noise, cavity resonance, and enclosed-space sound energy - not the thin high-frequency treatment handled by lighter felts. On the same melt-blown PP and hollow spiral PET bicomponent structure, it is built up in basis weight and thickness so sound waves travel a longer internal path through the fiber network. This targets tire roar, low-frequency road noise, equipment vibration, and resonance trapped under floor carpets, in trunks, rear panels, wheel arches, and equipment housings. A controlled rear air gap can be used to shift absorption toward the low-frequency band, and the pad recovers most of its thickness after compression while staying stable in humid and temperature-changing environments.

 

Because low-frequency performance depends on both mass and geometry, this product is usually specified as an irregularly shaped part rather than a flat roll. Drawing-based die cutting and prototype development convert component geometry into a pad that actually fills the cavity, and basis-weight and thickness grading let engineers tune low-frequency behavior against available cavity depth instead of forcing a one-size material. Batch consistency across the heavier grades keeps road-noise and tire-noise behavior predictable from trial to serial production.

 

Specifications

 

Parameter

Specification

Common Basis Weight

400 g/m² and above

Trunk Low-Frequency Grade

600-850 g/m²

Common Thickness

15-35 mm

Compression Recovery

≥70%

Maximum Width

165 cm

Material Density

0.01-0.06 g/cm³

Water Absorption

≤1%

Long-Term Service Temperature

-40°C to +110°C

 

Applications

 

product-800-800

Under automotive floor carpets and inside trunks, where the 600-850 g/m², 30-35 mm grade absorbs tire roar and low-frequency road noise and trunk cavity resonance that thin, high-frequency felts cannot control effectively.

Rear panels, wheel arches, and body cavities, where the pad compresses into irregular sheet-metal gaps and recovers at least 70% of its thickness, avoiding long-term acoustic loss from collapse or movement of the insulating layer.

Equipment housings and building cavities in relatively humid operating environments, where ≤1% water absorption, four-week mold resistance, and -40°C to +110°C stability keep filling performance consistent over time.

Customization

 

Basis weight (400 g/m² and up, including the 600-850 g/m² trunk grade), thickness (15-35 mm), dimensions, and forming method are adjustable to the installation position and cavity depth. Irregular parts can be developed from technical drawings or physical prototypes, with die cutting, hot pressing, and laser cutting available. Maximum width is 165 cm; OEM/ODM shaped components and mixed-grade orders within one MOQ are supported.

 

 

Packaging & Transportation

 

Trade term is EXW with payment in advance. Packaging is arranged according to customer transportation and warehouse conditions; detailed carton/pallet specifications for this insulation pad are To Be Confirmed per order.

 

FAQ

 

Q: What makes this pad different from a general acoustic felt?

A: It is weight-and-thickness graded for low and mid frequencies rather than high frequencies. Grades start at 400 g/m² and reach 600-850 g/m² at 30-35 mm, tuned with rear air gaps of 3-13 mm to shift absorption toward the low-frequency road-noise range.

Q: Can you develop it as a custom-shaped part?

A: Yes. Bicomponent Fiber Insulation Pad is commonly made as an irregular part from your drawings or prototypes, with sample preparation, small-batch trials, and volume production supported. Custom sample development takes about 10-15 days.

Q: What are the payment and trade terms?

A: We work on EXW terms with payment in advance. Production is 100% inspected before packing, third-party inspection is accepted, and a stated 1-3 year warranty applies.

 

Hot Tags: fiber insulation pad, China fiber insulation pad manufacturers, suppliers, factory, automotive acoustic insulation fiber, automotive multilayer acoustic materials, bicomponent acoustic insulation carrier, Bicomponent Automotive Acoustic Felt, bicomponent automotive acoustic materials, bicomponent noise insulation mats

Send Inquiry