Molded Underbody Shield

Molded Underbody Shield

PET Molded Underbody Shield is a semi-structural underbody panel molded from high-basis-weight core-sheath PET continuous-filament felt. During preheating the low-melting PET sheath melts and bonds the filament crossings, while the high-strength PET core stays continuous through the part, carrying tensile, bending, and local impact loads.

Product Description

 

PET Molded Underbody Shield is a semi-structural underbody panel molded from high-basis-weight core-sheath PET continuous-filament felt. During preheating the low-melting PET sheath melts and bonds the filament crossings, while the high-strength PET core stays continuous through the part, carrying tensile, bending, and local impact loads. The felt is formed directly into underbody curves, reinforcement ribs, edges, and mounting areas-without needing a separate PP panel, glass-fiber panel, or metal frame to make the main structure. The continuous filaments help prevent brittle crack spread from stone impact and mounting-point stress, and basis weight plus compression are chosen against rib height, mounting-hole loads, and available ground clearance.

 

Underbody shields face road stones and limited ground clearance, so the design uses local compression rather than a uniform sheet: Haokai raises density at mounting points and frequent stone-impact zones while keeping lower density on lightly loaded areas to balance protection and weight, tuning basis weight, rib height, and hole loads to the shield area. The factory runs PET continuous-fiber and steam-molding lines, and its continuous-fiber underbody material has passed third-party tests for tensile, bending, aging, stone impact, and chemical-liquid resistance. Shields are developed from customer drawings or prototypes, with samples in 10-15 days and 100% inspection before packing, so the panel reaches production with the local reinforcement already designed against real impact zones.

 

Specifications

 

Parameter

Specification

Recommended Basis Weight

1,000-1,800 g/m2

Optional Rigid-Board Weight

1,200-2,000 g/m2

Molded Thickness

2-8 mm

Finished Density

0.6-1.0 g/cm3

Tensile Strength

15-60 MPa

Molding Pressure

10-15 MPa

Long-Term Temperature

-40 degC to +120 degC (high-temp grade to +150 degC)

 

 

Applications

 

product-800-800

Vehicle underbody shields: a continuous-filament panel that protects the underside and smooths airflow while carrying local impact loads.

Engine-underbody heat-shield positions: a high-temperature grade (to +150 degC, heat-deformation above 180 degC) suits areas near elevated underbody temperatures.

Mounting-point and stone-impact zones: a locally higher-density structure that resists rock chips and concentrated stress around bolted holes.

Customization

 

  • Basis weight and rigid-board grade selection
  • Molded thickness and local compression per shield area
  • Reinforcement ribs, edge profiles, and mounting-hole load design
  • High-temperature 220 degC sheath option; OEM/ODM from drawings

 

 

Packaging & Transportation

 

Trade terms are EXW (ex-works): the buyer collects the finished goods from Jiangsu Haokai's facility in Rugao, Jiangsu after packing is complete. Payment is made in advance (prepayment), with RMB and related currencies accepted. Packaging is arranged according to customer requirements, such as cartons, pallets, separators, or supports selected to suit this component's shape and stacking needs; specific export packaging dimensions and methods are To Be Confirmed per project. FOB, CIF, and DDP terms are not offered.

 

 

FAQ

 

Q: Can the shield handle engine-area temperatures?

A: A high-temperature grade serves from -40 degC to +150 degC, and with a 220 degC high-melting sheath the heat-deformation temperature can exceed 180 degC.

Q: Do you have test data for stone impact and chemicals?

A: The PET continuous-fiber underbody material has undergone third-party testing covering tensile strength, bending, aging resistance, stone impact, and resistance to chemical liquids.

Q: What are sample and order lead times?

A: Custom sample development takes 10-15 days, production generally 7-15 days, and repeat orders are shorter after material and mold parameters are confirmed.

 

Hot Tags: molded underbody shield, China molded underbody shield manufacturers, suppliers, factory, automotive dashboard parts, automotive interior insulation components, PET Automotive Underbody Shield, PET Front Dash Insulation Panel, PET Molded Front Bulkhead Insulator, PET Molded Underbody Shield

Send Inquiry