Product Description
A rigid support frame and a soft absorbing layer are combined in one hot-pressed part for the A, B, and C-pillar cavities behind the interior trim. The pillar trim acoustic pad uses the rigid PET felt layer to hold the formed shape and mounting stability of the trim, while the softer PET felt layer absorbs wind noise and mid-frequency engine sound that builds up inside the slender, tapered pillar cavities. The two layers finish in a single hot-pressing operation instead of being sprayed or laminated later, and each pillar system can carry its own tuned weight and layup rather than forcing one universal density onto different cavity volumes. The material contains no glass fiber, so handling and assembly avoid itchy fiber dust, and it meets mainstream RoHS, REACH, ELV, and interior-air limits. Buyers receive a trim-backed absorber that keeps pillar panels straight over temperature cycling while quieting the column area where wind noise often concentrates.
An A-pillar slope, a narrow B-pillar between doors, and a rear C-pillar have different cavity volumes, trim gaps, and noise targets, so a one-density mat over-builds some pillars and under-serves others. Haokai designs each pillar's stiffness, acoustic, surface, and assembly requirements separately, selecting rigid-substrate weight, soft-layer thickness, and laminated surface in one flow from material proposal through sample validation, so buyers receive a tuned pad rather than a universal cut-to-fit strip.
Specifications
|
Parameter |
Specification |
|
Construction |
rigid PET felt support + soft PET acoustic layer, one-piece hot-pressed |
|
Soft felt weight (headliner grade) |
400-800 g/m² |
|
Rigid substrate weight (door-panel grade) |
600-1,000 g/m² |
|
Soft absorption layer thickness |
10-20 mm |
|
Acoustic liner NRC |
≥0.65 |
|
Formaldehyde emission |
≤15 µg/(m²·h) |
|
Odor grade |
≤3.5 |
|
Compliance |
RoHS / REACH / ELV / GB 30512 |
|
Laminated visible surface |
nonwoven / knitted / needle-punched carpet / PA tufted material |
|
Glass-fiber content |
none |
Applications

A-pillar trim fill: tapered rigid-backed pad follows the sloping windshield-header cavity and absorbs engine/wind noise entering at the header while hiding behind laminated fabric.
B-pillar inner trim pad: soft absorption layer between rigid support and trim damps mid-frequency beltline and door-close noise without widening the narrow pillar.
C-pillar and rear-quarter trim: low-VOC, mold-resistant layup sits in the rear cabin where interior-air limits matter and holds shape through the vehicle temperature range.
Customization
- Rigid and soft felt weight and thickness tuned per pillar system
- Laminated visible surface (nonwoven, knitted, needle-punched carpet, PA tufted)
- Formed cavities, mounting holes, and local compression per pillar geometry
- OEM/ODM from technical drawings or prototypes

Packaging & Transportation
Trade terms are EXW (ex-works): the buyer collects finished goods from Jiangsu Haokai's Rugao, Jiangsu facility after packing. Payment is made in advance (prepayment), with RMB and related currencies accepted. Packaging follows customer requirements, with cartons, pallets, separators, or supports suited to the formed pillar pads; export packaging dimensions and methods are confirmed per project. FOB, CIF, and DDP terms are not offered.
FAQ
Q1: Do you support OEM/ODM services?
A: Yes, OEM/ODM is supported.
Q2: How long does custom sample development take?
A: Custom sample development normally takes 10-15 days.
Q3: Do you perform 100% inspection before packing?
A: Yes, every finished part receives 100% inspection before packing.
Hot Tags: pillar trim acoustic pad, China pillar trim acoustic pad manufacturers, suppliers, factory, automotive interior support parts, PET felt forming sheets, PET thermoformed felt flexible panels, PET thermoformed felt panels, thermoformable PET felt, vehicle door trim parts




