Steam Molded Acoustic Felt
video
Steam Molded Acoustic Felt

Steam Molded Acoustic Felt

Steam molding sets this absorber apart from ordinary pressed felt: saturated steam softens the bonding fibers through the full felt thickness and locks the fiber network into a complex 3D contour while leaving its pores open, so deep draws and narrow radii form cleanly without the outer skin crushing and killing absorption. The steam molded acoustic felt keeps an open, air-permeable structure on irregular shapes that flat hot pressing cannot hold, delivering stable mid-to-high-frequency absorption on curved and pocket-like geometries where conventional felt thins or seals off.

Product Description

 

Steam molding sets this absorber apart from ordinary pressed felt: saturated steam softens the bonding fibers through the full felt thickness and locks the fiber network into a complex 3D contour while leaving its pores open, so deep draws and narrow radii form cleanly without the outer skin crushing and killing absorption. The steam molded acoustic felt keeps an open, air-permeable structure on irregular shapes that flat hot pressing cannot hold, delivering stable mid-to-high-frequency absorption on curved and pocket-like geometries where conventional felt thins or seals off. The process needs no solvent adhesive and holds dimension over repeated cycles, which matters when the part must follow a housing or cavity closely without springing back. Buyers choose it for shaped absorbers where the geometry itself makes standard molding unreliable.

 

Deep-draw cavities punish flat tooling: the outer skin compresses while the core stays loose, killing absorption exactly where the bend sits. Haokai's steam-mold development works from the buyer's prototype or drawing, tuning steam exposure, microfine content, and raw-felt weight so thickness and pore structure survive the draw radius. Validating these on trial samples before tool lock-in reduces the risk of over-compressed parts on geometries that press molding cannot hold.

 

Specifications

 

Parameter

Specification

Forming process

Steam molding (LMPET softened by saturated steam) with hot-press consolidation

Material

PET + LMPET blend; microfine PET up to 65%-75% (high-end)

Microfine fiber diameter

about 1-5 µm

Basis weight

soft felt 200-1,200 g/m²; high-end acoustic 600-1,200 g/m²

Finished thickness

15-30 mm (acoustic); soft grade 5-40 mm

Porosity

90%-96%

Air permeability

500-1,000 L/(m²·s)

NRC (20 mm)

0.55-0.65 standard; 0.70-0.85 high-end

Compression recovery

≥85%

LMPET melting point

110-180 °C

 

 

Applications

 

product-800-800

Irregular deep-draw cavity liners: Steam forms the contour without crushing the bend, preserving pores at the draw radius where flat pressing would seal the absorber shut.

Drip rails, kick panels, and shaped pocket absorbers: Uniform thickness around narrow curves gives consistent mid-high absorption instead of thin, dead spots near edges.

Motor-adjacent shaped absorbers: Microfine grades target electric-motor whine while the steam-formed shell fits the housing contour closely, leaving the air gap needed for absorption.

Customization

 

  • Microfine-fiber content, raw-felt weight, hot-press density, and finished thickness
  • Target-frequency tuning against available cavity and component curvature
  • Steam molding, mold forming, and precision die cutting; holes, curves, clearance zones
  • OEM/ODM from customer drawings or prototypes
product-800-800

 

Packaging & Transportation

 

EXW from the Rugao, Jiangsu facility; prepayment with RMB and related currencies accepted. Packing follows customer requirements - cartons, pallets, separators, or supports chosen to keep shaped parts from deforming under stack load; export packing dimensions and methods are confirmed per project. FOB, CIF, and DDP are not offered.

 

 

FAQ

 

Q1: What is the delivery time for standard products?

A: Standard products generally take 7-15 days, and repeat orders are faster after the process is stable.

Q2: Do you support OEM/ODM services?

A: Yes, OEM/ODM is supported; parts are developed from technical drawings or prototypes.

Q3: How are the products packaged for international shipping?

A: Packaging is arranged according to customer requirements, such as cartons, pallets, separators, or supports suited to the part's shape and stacking needs.

 

Hot Tags: steam molded acoustic felt, China steam molded acoustic felt manufacturers, suppliers, factory, PET Rigid Thermoformed Felt, PET thermoformable felt, PET thermoformable interior felt, PET thermoformed felt backing materials, PET thermoformed felt fiber panels, pet thermoformed felt materials

Send Inquiry