Filament Insulation Felt

Filament Insulation Felt

PET Filament Insulation Felt is a soft-and-rigid composite acoustic construction that combines a rigid formed felt layer with a lofty soft felt layer in one single-material PET part. The rigid layer carries a higher proportion of low-melting-point PET, so after hot pressing it becomes a dense, high-impedance layer that holds the component shape and blocks sound transmission.

Product Description

 

PET Filament Insulation Felt is a soft-and-rigid composite acoustic construction that combines a rigid formed felt layer with a lofty soft felt layer in one single-material PET part. The rigid layer carries a higher proportion of low-melting-point PET, so after hot pressing it becomes a dense, high-impedance layer that holds the component shape and blocks sound transmission. The soft layer keeps high porosity and absorbs the sound that gets through the rigid face or reflects inside the cavity. Because both layers are PET, they can be molded together without a separate adhesive or dissimilar material system, which also simplifies recycling of scrap and end-of-life parts. This layered, single-material build lets the part both block and absorb instead of forcing a choice between the two.

 

For an insulation felt, the value is the absorption-plus-blocking balance. The rigid face blocks transmission that soft felt alone cannot, while the soft layer soaks up what passes through instead of letting it keep reflecting in the cavity. Structures are built to the vehicle: firewall and bulkhead pads add an aluminum-foil reflective face, carpet insulation and motor covers pair rigid layers with soft felt, and wheel-housing liners pair rigid felt with a rear soft layer. Flame-retardant options are available, and balancing the soft-to-rigid ratio to the noise source lets each pad target the right frequencies without adding unnecessary weight to the vehicle.

 

Specifications

 

Parameter

Specification

Rigid Felt Basis Weight

600-1,200 g/m2

Rigid Felt Molded Thickness

2-5 mm

Rigid Felt Tensile Strength

>=2.0 MPa

NRC of 30 mm Composite Structure

0.75-0.90

Three-Layer Sound Insulation

>25 dB

Rigid Layer PET Ratio

50-70:30-50 (conventional:low-melt)

Heat-Deformation Temperature

>=120 C

Flame-Retardant Options

FMVSS 302, GB 8410, UL 94 HF-1/HB

Long-Term Service Temperature

-40 C to +120 C

 

 

Applications

 

product-800-800

Firewall and front-bulkhead pads: rigid-acoustic-rigid stacks block engine and road noise, often with an aluminum-foil reflective face.

Automotive carpet insulation and electric-motor sound covers: a rigid forming layer is backed by a soft acoustic layer for combined blocking and absorption.

Wheel-housing liners: rigid felt faces stone and road impact while the rear soft layer absorbs cavity noise.

Customization

 

 

Soft-to-rigid layer ratio; total basis weight; local compression and surface lamination; aluminum-foil reflective face; flame-retardant grade (FMVSS 302 / GB 8410 / UL 94 HF-1-HB); molded composite parts from drawings; OEM and ODM supported.

 

 

Packaging & Transportation

 

All PET Filament Insulation Felt components are traded on EXW terms, with payment made in advance. Packaging is arranged according to customer requirements, including carton or pallet options and edge or pressure-point protection as needed. Specific outer-carton dimensions, pallet configuration, and loading method: To Be Confirmed. Production photos or videos can be supplied during manufacture, and damaged goods on arrival are resolved by mutual negotiation.

 

FAQ

 

Q: Why combine rigid and soft felt?

A: The rigid layer blocks sound transmission and holds shape; the soft layer absorbs remaining sound that would otherwise reflect inside the cavity.

Q: What sound insulation can a firewall build reach?

A: A 40 mm rigid-acoustic-rigid construction provides more than 25 dB, and a 30 mm soft-plus-rigid-plus-air composite reaches about NRC 0.75-0.90.

Q: Is it flame retardant and recyclable?

A: Yes - FMVSS 302, GB 8410, or UL 94 HF-1/HB options; both layers are single-material PET for recycling, with water absorption below 0.1% after water-repellent treatment.

 

Hot Tags: filament insulation felt, China filament insulation felt manufacturers, suppliers, factory, automotive PET acoustic felt, PET continuous filament automotive felt, pet continuous filament nonwovens, PET Filament Acoustic Felt, PET nonwoven filtration materials, recycled PET continuous filament fiber

Send Inquiry